Pairing a HC10 Linak Hand Control

Pairing a HC10 Linak Hand Control

  1. Connect the system to a power outlet
  2. Pairing mode has started when the Under Bed Light starts flashing. It will run for 3 minutes
  3. Press the top two buttons to pair the hand control 
  4. A long flash means successful pairing
  5. The system is paired and ready for use
  6. The system will continue to be in pairing mode until the previously mentioned 3 minutes elapse. Then the light will turn green continuously to show that the system is no longer in pairing mode

    • Related Articles

    • Pairing a HC20 Linak Hand Control

      Connect the system to a power outlet Pairing mode has started when the Under Bed Light starts flashing. It will run for 3 minutes Press the top two buttons to pair the hand control A long flash means successful pairing The system is paired and ready ...

    • Pairing a HC32BL/HC30BL Linak Hand Control

      Make sure the batteries are in correctly and the screen will turn on. Turn the bed off for 5-10 minutes to drain the power. Connect the system to a power outlet Pairing mode has started when the Under Bed Light starts flashing. It will run for 3 ...

    • Pairing a HC40BL Linak Hand Control

      Make sure the batteries are in correctly and the screen will turn on. Turn the bed off for 5-10 minutes to drain the power. Connect the system to a power outlet Pairing mode has started when the Under Bed Light starts flashing. It will run for 3 ...

    • Pairing a TD3 with an infrared wireless remote HB22RF/HC20RF Linak Hand Control

      You will need a pen to be able to access the reset button on the TD3 If one or both functions are raised the system will go into an ordinary reset mode which will bring all functions to a completely flat position and another reset will then need to ...

    • Pairing a TD3 with a Bluetooth wireless remote HB22RF/HC20RF Linak Hand Control

      You will always have a Bluetooth dongle plugged into the TD3 to be able to connect this style of remote via Bluetooth Turn the bed off for 5-10 minutes to drain the power and turn it back on The Bluetooth dongle will flash blue Pair the remote to the ...